If I don't have these lines in my /etc/network/interfaces file it doesn't work: auto lo eth0 iface lo inet loopback iface eth0 inet dynamic I then need to run the dhclient command each time after I reboot the system. Networking works fine on the laptop but not from within the virtualbox virtual... I have a router and use DSL to connect to the Internet. when I click 'Connect to Server' - I already stuck on what 'Service type' to use. Respected Sir/Madam, I am using HP Proliant DL 145 G2 with AMD Opteron server.
I'd like to know what network tools are out there under gnome that will display all the wireless networks within my network. Installed Ubuntu Linux on both Mac and PC, now, newbie question: how does one share a volume hard drive, Mac Hard 0 and PC Hard 0 (ie) both are being share, and each machines, can see the other hard drive. I want to mount my Ubuntu hd (formatted as ext3) on my mac, and I wanted to mount my Mac hd (formatted as hfs ) on my Ubuntu machine. Both are definitely connected properly to the LAN, as they can both surf ...
this is strictly between these two computers, I don't want no-one else from the outside, having access, on these drives. Both should preferably be read-only, and they must auto-mount at boot/login time. Recent Discussions GTK_IS_WIDGET (widget)' Failed Ot - Computer Won't Boot Startup Scripts Not Running On 16.10[Neo4j] Getting Started With Nearest Neighbour Over Multiple Data Values File Reading App That Allows A Spasific Tts Engine?
May 24 NR5 pppd: pppd 2.4.5 started by root, uid 0 May 24 NR5 pppd: Using interface ppp0 May 24 NR5 pppd: Connect: ppp0 /dev/pts/3 May 24 NR5 pptp: nm-pptp-service-9764 log[main:pptp.c:314]: The synchronous pptp option is NOT activated May 23 NR5 Network Manager: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0) May 23 NR5 Network Manager: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found.
May 24 NR5 pptp: nm-pptp-service-9764 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 1 'Start-Control-Connection-Request' May 24 NR5 pptp: nm-pptp-service-9764 log[ctrlp_disp:pptp_ctrl.c:739]: Received Start Control Connection Reply May 24 NR5 pptp: nm-pptp-service-9764 log[ctrlp_disp:pptp_ctrl.c:773]: Client connection established.
Check your router configuration whether PPTP pass-through is enabled and forwards to the machine you want to tunnel from.
Known network manager bug https://launchpad.net/ubuntu/ source/network-manager/ bug/284298 Due to a bug if you want to assign a static IP on Ubuntu 8.10 Desktop your setting will be overwritten after the next reboot because of a bug that escaped the Ubuntu team.I have since solved this problem by modifying the /etc/network/interfaces file, but I don't know if doing that I caused another one...refused to work. installing and adding to my session the nm-applet (still does not show in the panel but that could be due to a different issue)Now the system is a mess: I don't know if I should use System Network configuration or open the nm-applet from a terminal and configure the WLAN from there (as I said it does not show in the panel)What I would like to do is to "reset" my networking configuration to the default intrepid configuration, this is because on an external hard disk which I used to test intrepid alpha everything works great, so I want the same on my internal hard disk without having to perform a fresh install. URL: Hi, I tested all the way through Intrepid's Alpha's, just got the Beta tonight and suddenlt wired networking doesn't work. I was just wondering if anyone else was experiencing networking... Virtual Box is installed on the laptop using NAT networking and it works. I would like to access files on my Desktop from my laptop.I then made things worse trying to fix the problem by: 1. //I'm emailing from a live USB stick running SLAX I can't remember exactly what version Netwatk Manager updated to. Hi all, I did not have to do this in Hardy and I am trying to find a solution to this. If I take the laptop to another location, and use the wireless to connect to another network and establish a connection using dhcp, I get an ipnumber in a different subnet. Can anyone explain how I can do this or to a site that will explain this in simple detail.It does seem to work now, at least, a lot more things work now that didn't before : - The hardware Wireless network indicator light blinks on my laptop - Initially Network Manager woulnd't run, so I configured the SSID manually, after that the network manager... Hi everyone, Now that my Ubuntu box is stable at home, yesterday I zapped the Win XP off my Toshiba Satellite Laptop and put Dapper on it.Hello, I have upgraded Ubuntu 8.04.1 to 8.10 beta on an Advent 4211 (MSI Wind clone). However, the taskbar icon of the Network Manager has an orange exclamation mark and says "No network connection". All is working well, I got the Belkin 54g PCCard up and running, but my problem is :- *) Home WLAN - WEP encrypted , have set this up as the Home location in Network Manager *) Work WLAN - Fully opened access point with no security enabled, how can I tell...I've read a couple references to what network device vista needs, but they where not exactly clear.